Injin walda mai amfani da laser mai amfani da fasahar fiber mai amfani da axis 5 ta atomatik tare da maƙallin juyawa don kayan aikin ƙarfe na aluminum 2000w 3000w
Cikakken Bayani game da Samfurin
Injin walda na Laser na QGF4-1500 na dandamali shida na Axis daga Qiangang Laser tsarin haɗin kai ne mai inganci wanda aka tsara don walda ƙananan kayan aiki da abubuwan da ke da siffa mai rikitarwa. Yana da aikin sarrafa software tare da aiki mai ƙarfi kuma ya haɗa da tsarin jagora na haske ja don daidaitaccen matsayi. An sanye shi da kan walda mai pendulum guda ɗaya, yana tallafawa tsarin walda mai tabo, layi, da zagaye, tare da faɗin ɗinki mai daidaitawa. Injin yana ba da motsi mai sassauƙa tare da gatari X, Y, da Z, tare da zaɓi na juyi don haɓaka iya aiki. An gina shi da tushen laser mai inganci mai fiber, tsarin ƙarfe mai ƙarfi na aluminum, da tsarin sanyaya yanayin zafi biyu mai hankali, yana ba da aiki mai inganci tare da ƙarancin buƙatun kulawa. Hakanan an haɗa hanyoyin haɗin I/O masu faɗaɗa don haɗa kai ta atomatik mara matsala.Gabatarwar samfur
Siffofi
1. Walda na ƙananan kayan aikin gargajiya da sassan da ba su da tsari iri ɗaya (akwai kayan aikin da aka keɓance);
2. Cikakken sarrafa software tare da babban haɗin kai;
3. Babban kwanciyar hankali, canjin wutar lantarki
4. An sanye shi da jagorar laser ja;
5. Faɗaɗa hanyoyin sadarwa na I/O da aka tanada don haɗawa da tsarin sarrafa kansa na lantarki;
6. An haɗa shi da kan walda mai lanƙwasa ɗaya, walda mai layi, zagaye, da kuma tsari;
7. Aiki mai sauƙin amfani tare da ƙarancin kulawa;
8. Wannan tsarin walda na laser ya ƙunshi fi
tushen laser, kan walda mai pendulum guda ɗaya, daidaitattun kayayyaki, tsarin jagorar haske, tsarin zagayawar sanyaya, alamar haske ja, tsarin saka idanu na hoto na CCD, da kuma kabad ɗin aluminum mai daidaito.Aikace-aikace
Sigogi
| Mai walda na Laser Platform | ||
| 1 | Ƙarfin Laser Mai Daidaitawa (W) | 1500W—3000W |
| 2 | Tsawon Laser | 1080±5nm |
| 3 | Kewayen Wutar Lantarki | 1-100% |
| 4 | Mitar daidaitawa | Ci gaba/An daidaita 20-50KHz |
| 5 | Kwanciyar Hankali | ≤3% |
| 6 | Maimaitawa | ±0.05mm |
| 7 | Ingancin Haske | 1.1/1.3/1.4/2.1/-2.7m³ |
| 8 | Matsayin hasken ja | Suna da |
| 9 | Faɗin walda
| 0.3-0.4mm(wanda za a iya daidaitawa） |
| 10 | Tsarin Fiber na Tantancewa | QBH ko fitarwa na musamman |
| 11 | Tushen wutan lantarki | 220V ko 380V (ya danganta da ƙimar wutar lantarki)） |
| 12 | Zafin Aiki | 10-40℃ |
| 13 | Tsarin Aiki | Tsarin Kula da Motsi na Laser mai Axis Shida |
| 14 | Kebul na fiber na gani | mita 15 |
| 15 | Ingancin bugun jini | Axis na X = 800mm, Axis na Y = 400mm, Axis na Z = 300mm, Axis na A = Axis na Juyawa (zaɓi ne) |
| 16 | Axis ɗin motsi
| 4-axis |
| 17 | Matsakaicin yawan amfani da wutar lantarki | ≤14kw |
| 18 | Jimlar nauyi
| Kimanin kilogiram 400 |
| 19 | Girman Waje | 1750mm*1200mm*1700mm |
Samfura
Tsarin gine-gine
-
1. Tushen Laser: Max/Raycus
-
-
2. Shugaban Walda na Fiber Laser
-
3. Tsarin sarrafawa:
-
4. Na'urar sanyaya ruwa: Hanli
-
5. Mai ciyar da waya
-
6. Nunin CCD
-
7. Injinan Servo
Cikakkun bayanai
| | Suna | Alamar/Ƙasar Asali | Samfuri/Bayani |
| 1 | Laser ɗin fiber
| Mafi girma | 1500W |
| 2 | Shugaban Walda na Fiber Laser | LeizhiShugaban Walda |
|
| 3 | Tsarin Kulawa
| Tsarin Bas na Sabuwar Tsari 6
|
|
| 4 | Tsarin Sanyaya | Hanli
|
|
| 5 | Motar hidima
| HCFA |
|
| 6 | dandamalin aiki | Matsayin Qiang | 1300*1000mm |
| 7 | Ingancin bugun jini |
| 800*400*300mm |
| 8 | Allon CCD | Matsayin Qiang |
|
| 9 | Mai Ciyar da Waya (Servo) | Matsayin Qiang |
|
| 10 | Na'urar saka idanu ta LCD | Babban kamfani |
|